B24 continuous droupout


#1

on B24 is a few drops per day. We tried different settings without success. I have a total of 4 P2P with the same problem. Any advice?

|2018-12-18 20:55:57|00:00:03|10.111.14.146|
|2018-12-18 20:04:18|00:00:04|10.111.14.146|
|2018-12-18 19:48:00|00:00:10|10.111.14.146|
|2018-12-18 18:08:22|00:00:03|10.111.14.146|
|2018-12-18 17:54:14|00:00:10|10.111.14.146|
|2018-12-18 17:54:12|00:00:06|10.111.14.146|
|2018-12-18 08:00:13|00:00:03|10.111.14.146|
|2018-12-18 08:00:02|00:00:03|10.111.14.146|
|2018-12-18 07:59:38|00:00:03|10.111.14.146|
|2018-12-18 07:59:17|00:00:03|10.111.14.146|
|2018-12-18 07:58:48|00:00:03|10.111.14.146|
|2018-12-18 07:38:06|00:00:03|10.111.14.146|
|2018-12-18 07:37:56|00:00:03|10.111.14.146|
|2018-12-18 07:37:46|00:00:03|10.111.14.146|
|2018-12-18 07:37:37|00:00:03|10.111.14.146|
|2018-12-18 07:37:26|00:00:03|10.111.14.146|
|2018-12-18 03:34:22|00:00:03|10.111.14.146|

firmware 2.5.1-PTP
Link Length 334.0 m / 1096 ft
Tx Power 4 dBm
Signal -44.2 dBm

dashboard printscreen https://i.imgur.com/4bDXyOk.png
zabbix screen https://i.imgur.com/22B2SkE.png


#2

Looks like the link is aligned and you have good signal. Have you tried lowering the channel width and moving around in the spectrum to see if it could be a noise issue?


#3

I can not see any noise. I can tried lowering the channel width


#4

I like how Mimosa does it’s noise monitoring in theory, but, at least with the B24, there seems to be some type of interference that gets through the monitoring. Can’t say for sure, but several people have had similar issues as you have and Dropping channel and moving around identified the bad spots and made things work…