B5 ethernet bouncing up and down


#41

This B5-lite is connected to Netonix switch. Can’t check grounding right now. Once I updated the firmware to 1.4.6 I started getting this error that I didn’t see with 1.4.4.

2016-01-01 00:00:45 (UTC +0000) root: MIMO_EVENT binaryversion=90afb59714e83b80041e9bf58c3ba9765029cc29 build_time=2017-07-04 05:52:41 (UTC +0000) bamboo_build_time_stamp=2017-07-04T05:51:22.004Z bamboo_build_number=9 project=FW-B5207 branch=release/1.4.6
2016-01-01 00:00:46 (UTC +0000) root: MIMO_EVENT ethernet link up (100/Full)
2016-01-01 00:00:51 (UTC +0000) root: MIMO_EVENT ethernet vendor id: 0x221622.
2016-01-01 00:00:51 (UTC +0000) root: MIMO_EVENT Shutdown reason: UI-initiated reboot - Upgrade
2016-01-01 00:00:23 (UTC +0000) root: MIMO_EVENT Channel Change p.ch:37(5185 MHz) s.ch:0(0 MHz) bw:120
2016-01-01 00:00:49 (UTC +0000) root: MIMO_EVENT ethernet link is not ready
2016-01-01 00:00:23 (UTC +0000) root: MIMO_EVENT Channel Change p.ch:37(5185 MHz) s.ch:0(0 MHz) bw:120
2016-01-01 00:00:23 (UTC +0000) root: MIMO_EVENT Channel Change p.ch:37(5185 MHz) s.ch:0(0 MHz) bw:120
2016-01-01 00:00:39 (UTC +0000) root: MIMO_EVENT ethernet link is not ready
2016-01-01 00:00:53 (UTC +0000) root: MIMO_EVENT ethernet link up (100/Full)
2016-01-01 00:00:53 (UTC +0000) root: MIMO_EVENT ethernet link becomes ready
2016-01-01 00:00:54 (UTC +0000) root: MIMO_EVENT ethernet vendor id: 0x221622.
2016-01-01 00:00:54 (UTC +0000) root: MIMO_EVENT Shutdown reason: Watchdog Reset
2016-01-01 00:00:55 (UTC +0000) root: MIMO_EVENT ethernet link down
2016-01-01 00:00:56 (UTC +0000) root: MIMO_EVENT Startup reason: Watchdog Reset
2017-10-16 21:39:51 (UTC +0000) root: MIMO_EVENT System time changed… phystats re-sync

What watchdog is this?


#42

I’ve solved eth up down using Ubiquiti POE and changed the SFTP cable. Will monitor for a week.


#43

Definitely solved. I install an Ubiquiti EdgePoint EP16 ( Exeterior switch with gestionable PoE output ) and power on a three Mimosa devices with a short 2m to 5m and works fine from one month ago.

Previusly i tried the PowerBox Pro of Mikrotik ( Similar device to Ubiquitie EdgePoint ) to power on my Mimosa APs, but not work, link down everyday.


#44

I have the same problem AND I probed a lot of sings like you. I will try with c5c because the Situation Is unsustainable. I have Manu complaints


#45

I’m going to go ahead and close this thread. It’s extremely old and bringing it back from the dead doesn’t help anyone.

If you are experiencing similar issues, please open a new thread.


#46