How I can configure the B5C in Trunk Mode

Can the B5C be configured in trunk mode for example vlan 10 the management and is able to pass all of the other vlans that the network is trying to support?

Please advise

I believe all Mimosa equipment is setup in Trunk mode by default, at least the PTP equipment is. You can definitely setup the equipment’s Management onto a particular VLAN.

Hi @CARLOS10,

The Mimsoa PTP equipment only works in Trunk mode. This means you can pass any type of packets across the link. Essentially our PTP radios are a transparent bridge.

Thanks for the reply and information