Low capacity low RX rate Link Length 620.0 m

Hello all
I need someone to help me complete the link
Note that I got low RX rate and poor performance in transferring capacities
thanx alot

Thank you for posting your issue in it’s own topic.

From the sounds of it, I would suspect an issue with the alignment. The B24s can be very difficult to align.

Could you please post a screen shot of your main dashboard screen there is a lot of diagnostic information there that can be of significant use.

1 Like

It looks like you are short 3-6 dB is expected signal.

While you wouldn’t think that’s all that much. 24 GHz is effected by all sorts of things pretty badly.

I would play around with the alignment a bit more.

Secondly, for your link distance, you should be able to use a 2x80 channel. That will significantly increase the amount of bandwidth you can pass. (For comparison, I have a link that is 4 times longer and I have a similar signal strength as what you are getting.

From there, I would also try using the lower frequencies available to you. They will be less effected by the weather, not by much, but every little bit helps.